TechR's
I need to know how to make an OBD2-OBD1 conversion harness. I wanna make one for my brother and maybe myself later. I don't wanna spend 200 on something that doesn't look to hard to do it myself. I got spare OBD2 computers all I need to know is where to solder the wires of the OBD1 harness. Please help. Email me at datboykitoy@hotmail.com. Thanks

Keith

The harness should be universal rite for all OBD2 V.1 Honda/Acura's? Rite


[Modified by kurupt.ONE, 2:39 AM 12/5/2001]

 

first you might need a helms book for the wiring. second you need a the OBD1 plugs. thrid you need the female part of the ECU box. than you go for wire to wire.
this might take a hour or two.
good luck man email me if you run into any problems

 

Coo thanks. I found out how to do the one for my brother's Hybrid B20Z-EK. I just need to buy a Helms for my Gen 5 Lude.