I am going to build my own obd0 to obd1 harness and I already have the obd1 connectors. I need the amp/tyco part number for the obd0 connector.

 

why dont u just go cut them out of the yard and depin all the old wires and repin the new ones with new pins from honda?

 

I am looking for new connectors, but if I can't find any, then I may have to go that route

 

lol wash them up with some mr.clean with topjob and they look brand new.all u need is the 2 black clips and one A clip not sure on part number.thats something i tohugh your could buy just in one peice had to buy as complete harness.u know sorta like the tps and t/b deal.

 

All the connectors that are on ecu jumpers are made by amp/tyco and someone has to know the obd0 pat number

 

I know you're determined, but just go ahead and buy an OBD0 to OBD1 adapter harness from Rywire. Simple, but with cost though.

 

AMP/Tyco 172023-2 and
AMP/Tyco 171366-4 for the two OBD0 connectors.

There's your answer, for anyone else who finds this thread in a search.