I have searched and i cant find what is described on this site and others.

http://s4.hubimg.com/u/4069063_f260.jpg

I cant find what is shown in that picture above

 

There is a wire going to my fan and a harness. The harness is 2 pieces. One has many wires and the other has 2 single wires going into it and one wire coming out the back

 

http://www.hondahookup.com/forums/sh...-The-CEL-Codes

Just found this site. I think I saw that green box up there. I am going to look right now

 

Found it. Connected the 2 wires with a piece of wire, turned my car to on and the check engine light stayed solid. Does that mean that I have no codes or does that mean that the wire I used was not good enough.

I am trying to diagnose a no crank but no start