Which OBD - 1 Distributors are correct AND fit b16a or b18c5 head?

 

its depend on your wiring ur'e using. if ur'e using OBD1 wiring, u should use OBD1 distributor. u can't use OBD0 or type r or GSR distributor. If i'm wrong, please correct me. ur ECU also must equivalent too. PR3 or PWo for OBD0, P30 for OBD1, P72 for GSR and P73 for B18C5.

 

i have obd0 wiring and am converting to obd1 with harness adapter and p28 ecu - basically to be able to get the better Hondata. so need the correct dizzy - what about the sohc vtec distributors?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Ruby Civic &raquo;</TD></TR><TR><TD CLASS="quote">i have obd0 wiring and am converting to obd1 with harness adapter and p28 ecu - basically to be able to get the better Hondata. so need the correct dizzy - what about the sohc vtec distributors?</TD></TR></TABLE>

B and D series are not interchangable except for a 90-91 LS Dizzy on a D16A6 since there both OBD0. If you convert to OB1 you'll need any B series OBD1 Dizzy which will work. You'll have to soder the wires to the new dizzy though and change injector clips to make it work right

 

I would say that a Del Sol VTEC distributor would work perfectly. It is a B16A, after all.

 

hey, i heard that if you kept the injector resistor box that you did not have to monkey with the injectors (obd0)??

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mr. S &raquo;</TD></TR><TR><TD CLASS="quote">I would say that a Del Sol VTEC distributor would work perfectly. It is a B16A, after all.</TD></TR></TABLE>

Go with the OBD1 Del Sol b16a distributer.

 

correct. but that only goes for saturated ones or peak and hold i cant remember


Modified by thid92 at 9:02 AM 10/15/2003