Hey everyone, I have a 94' Del Sol, with an 01' LS motor. Everything is OBD II. Dizzy, ECU... etc. I just bought an OBD I P75, for tuning.

What will i need to do to get it going on the OBD I ecu? Just the conversion harness? Do I have OBD II A or B?

Do i need to swap Dizzy's, or even the whole engine bay harness?


I'm clueless when it comes down to it.

 

You should be using your stock Sol engine harness. As in, putting it on the LS motor, swapping or extending any plugs or wires needed. You will need an OBD1 Dizzy.

 

convert back to obd1,ull need a jumper harness from rywire,and the dizzy harness,ull also need a obd1 dizzy and obd1 ecu.and thats all ull nweed to convert

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by zccr-xsi &raquo;</TD></TR><TR><TD CLASS="quote">convert back to obd1,ull need a jumper harness from rywire,and the dizzy harness,ull also need a obd1 dizzy and obd1 ecu.and thats all ull nweed to convert</TD></TR></TABLE>

The car is a 94, why does he need a jumper harness.

 

he said it was obd2 so he will need a obd2 to obd1 harness.again rywire has evrything u need

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by zccr-xsi &raquo;</TD></TR><TR><TD CLASS="quote">he said it was obd2 so he will need a obd2 to obd1 harness.again rywire has evrything u need</TD></TR></TABLE>

Upon looking at his other thread about boosting his del sol, he's not actually certain the OBD of the car.

 

uh? didnt see that one.