ok well my uncle just cleaned his motor off and now it doesnt start. he thinks its spark. it turns over but wont fire. there is fuel pressure. we have checked the dizzy cap rotor spark plug wires and spark plugs. could there be water damage somewheree? let us knwo what u think please. thank you
-Kyle

 

igniter?coil? did u see if the pulgs have sprk by holding them to the valve cover bolt,then try turn over the motor?

 

with the meter it says that the ignitor and coil have spark but we did the spark plug thing and no spark. but we just bougth new spark plugs and wires for it after this happend and that didnt make a difference
-Kyle

 

no kinda CEL??

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by H4 Project &raquo;</TD></TR><TR><TD CLASS="quote">with the meter it says that the ignitor and coil have spark but we did the spark plug thing and no spark. but we just bougth new spark plugs and wires for it after this happend and that didnt make a difference
-Kyle</TD></TR></TABLE>


your spark could be to weak to ignite the fuel.try changing out the coil/ignitor.see what happens then.no your on trial error basis.how do the ends of the plugs look.have u bought new plugs and wires or did u test them.go buy them new dont worry bout making sure the old ones are good.are u showing a check engine light?

 

the car wont start i cant check for a cel. i dont believe there was tho. new plugs and new wires. i told him just buy a new rotor cuz the metal tab might be worn down or something i think we is going to try that today
-kyle

 

hum?
get new cap and rotor and try again.are u sure all the timing **** is right?

 

that happened to me in a 4x4 i had i sprayed some wd-40 in the rotor to eliminate any water in it and she fired right up. as long as your boots were sealed correctly on your vavle cover you shouldnt have any water in the motor.