need tranny help
i have a 93 integra with a b18c running a b16a tranny well my tranny went out. i read some where that i can use a 92or 93 tranny caseing and put the gsr internals in there and every thing would work fine i was wondering what was your opinion
i have a 93 integra with a b18c running a b16a tranny well my tranny went out. i read some where that i can use a 92or 93 tranny caseing and put the gsr internals in there and every thing would work fine i was wondering what was your opinion
You're lucky you have a 93 integra which has a YS1 transmission. That specific transmission actually uses the same internals (gearing and synchros) as the early Hydro b-series transmissions. What I'm not sure of, is if B18C gears will fully fit in a YS1 transmission. I do know for a fact that 92-95 Hydro B16A/Y21 gearing will fit into a YS1 transmission though (LSD too)....which is the same gear ratio you'd find in a 92-93 GSR/B17 tranny.
Wish I could help you more with this subject....but I've never swapped GSR gears in a YS1 tranny before or know of anyone that has. Most of the time people go with B17 YS1 tranny or the JDM counterpart which has an optional LSD.
Thread
Thread Starter
Forum
Replies
Last Post
the.hamburglar
Hybrid / Engine Swaps
7
Aug 23, 2005 10:06 AM




