NEED torque specs!!
and need to replace it immediately..
Joined: Oct 2006
Posts: 17
Likes: 1
From: CG, MN, USA
Re: NEED torque specs!! (CiViCgT32)
These are specs from a B16A2 (2000 Si)
Cylinder Head Bolts 61 ft/lb
Camshaft holder plates (8x1.25mm) 20 ft/lb
Camshaft holder (6x1.0mm) 7.2 ft/lb
Camshaft pulley bolts 41 ft/lb
Hope this helps.
Cylinder Head Bolts 61 ft/lb
Camshaft holder plates (8x1.25mm) 20 ft/lb
Camshaft holder (6x1.0mm) 7.2 ft/lb
Camshaft pulley bolts 41 ft/lb
Hope this helps.
Joined: Sep 2006
Posts: 21
Likes: 0
From: Dayton, OH, US
Re: NEED torque specs!! (Evil_1)
head bolts should be a two step sequense... 22 lb ft, and 61 lb ft. and you have a pattern to go by.
9 5 1 3 7
8 4 2 6 10
when you get done go back and torque 1 and 2 again to 61.
Good Luck!!!
9 5 1 3 7
8 4 2 6 10
when you get done go back and torque 1 and 2 again to 61.
Good Luck!!!
Thread
Thread Starter
Forum
Replies
Last Post
h22_crx
Honda Prelude
0
Apr 18, 2006 09:28 PM