alright guys long story short i have a 92 si bubble ecu plugs were cut i bought obd1 gsr ecu plugs but some of the colors dont match up with the ones on the si harness and i know the integra's have some different color wires i got a diagram online after doing some reserch and the best one i found was http://technet.ff-squad.com/wiring.obd1.htm

some of the wire colors still didn't match up now im thinking to replace that whole harness which i hear goes from the drivers side kick panel runs along the firewall separates to the ecu plugs on the passenger side kick panel and through the firewall to the engine bay. i just need a tutorial or a DIY with pics on how to do it. if you guys can help out it would be much appreciated thanks.

 

Why didn't you buy ecu plugs for a sohc vtec ecu? (p28)

 

couldnt find them online and local junk yards where trying to charge me $250 for the three plugs from a sohc i was like wtf!?!?!

 

Even if the wires don't match the color listed, they are still in their proper pin locations assuming nothing was tampered with.
You may get a few mismatching colors, but just locate the proper pin location.

 

i took pics from another 92 bubble but there were still different on each ecu plug im starting to wonder if the previous owner change some wires on the harness i guess im gunna have to replace that harness without a doubt

 

bump guys i still need help with this i want to change the firewall harness a need a diy or tutorial or some info from somebody who did this before

 

You need to search around some more. There are plenty of diagrams and tutorial floating around.
Use the search button please..

We are not here to spoon feed you.

 

No need for any smart *** remarks im just looking for somebody to point me in the right direction or somebody that had or has a similar problem. Ive already looked on this site didn't find nothing related to my problem also checked on b20 tried looking for wiring diagrams on the internet search engines and nothing

 

Search the ones for your exact car and the exact ones for the plugs you got. And match them, some may not match color but as long as they match pin #

 

Good luck getting an answer with an attitude like that.

 

if you cant look at the diagrams in the link that YOU posted and make it work, than you shouldn't be attempting to take on this job. it doesnt matter what color the **** is as long as the wires go the proper pins on the ecu.