I have a 94 del sol vtec b16a3. I have 136,xxx miles. I just had the head fully built milled, and pnp. I also had the skunk2 intake manifold port matched to the head and 68 mm tb. I have a set of the comp cams 57200 (stage II) The cams were degreed in exactly according to comp cams and the piston to valve clearance was checked. Since I got the car back I can see smoke, white or blue ,when accelerating hard, it is hard to tell when driving. People that have followed me say that it smokes when not driving hard. I had the oil changed and checked the oil a few days after. exactly full. I have put 1000 miles on it and the oil is less than 1/10 qt low, which is not unusual. I checked the coolant level and it was full. The car runs great, but the smoke is embarrasing. Any ideas would be great.