hey im putting a b20z into a 00 civic... everything is done except the car wont run on the obd2b p75 ecu bc of the immobilizer... can someone tell me how i can remove the immobilizer in the ecu or bypass it? id rather just remove the chip off the board but i need someone to tell me which it is ect and if that would effectively bypass the problem... thanks guys

 

im not sure how to remove the chip or disable it. get an obd1 ecu and jumper harness

 

dont want to and cant... nys emissions requires obd2 ecus in obd2 cars... so i need to make this work... or ill do an obd2b to obd2a harness and run the obd2a p75 wo the immobilizer but id like to know if there is a wway to remove the chip from this ecu

 

yes you can remove the immobilizer but you'll have a check engine light on!
what i did was i transfer my immobilizer from my gsr ecu onto my usdm itr 73 ecu and it works well with no check engine light. and i have a 2000 integra. but your in a different story, you have a civic so if you remove the chip, like i said earlier you;ll have a check engine light!
other option would be get a jumper harness obd2b to obd2a!

 

yeah im considering the jumper harness... im wondering though if i remove the immoblizer chip is there a resistor or something i can soilder on the board to bypass the check engine light?

 

not that i know of...

going OBD2a would be the best thing to do in your situation.

 

thanks ... thats what ive been thinking... do you or anyone you know sell an obd2b to obd2a harness for cheap??

 

What he said. OBD2b-2a harness here

 

can go with rywire! i think jhpusa.com selling rywire harness cheaper!