WE'RE DOING A ZC SWAP IN A 90 CIVIC SI
WE HAD THE OLD ENGINE OUT AND THE NEW ONE IN AND RUNNING IN 6 HOURS, NOW WE ARE STUCK, CAUSE THEY CUT THE AXLES, AND THE D16 AXLE SPLINES ARE NOT THE SAME, DO WE NEED ZC AXLES OR CAN WE USE AXLES OUT OF SOMETHING ELSE?

 

what trans are you using the zc?
also do you have the half shaft?

 

YES AND YES

 

so no buddy knows? ok sweet, i guess i'll have to try a different forum