I have a manual for a y8 motor, but I'm not sure if the specs are the same as a z6. All I need is the main and rod bearing clearance specs, and the torque specs for the girdle bolts (for the z6). I'm building it tonight so help is MUCH appriciated!!!!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by G3NR8 &raquo;</TD></TR><TR><TD CLASS="quote">I have a manual for a y8 motor, but I'm not sure if the specs are the same as a z6. All I need is the main and rod bearing clearance specs, and the torque specs for the girdle bolts (for the z6). I'm building it tonight so help is MUCH appriciated!!!!</TD></TR></TABLE>

Specs for new:

Mains: # 1 and 5 journals: 0.018-0.036 mm (0.0007-0.0014 in)

Mains: # 2, 3, 4 journals: 0.024-0.042 mm (0.0009-0.0017 in)

service limit: 0.05 mm (0.002 in)

Rods: 0.020-0.038 mm (0.0008-0.0015 in)

service limit: 0.05 mm (0.002 in)

Girdle bolts: 38 ft-lbs for Z6

 

I pm'd you a link to a FSM if you still need it.

 

Thanks alot guys
I put the build off until next tues but this helps alot.

 

There goes the urgency.

Can I get that link to Some FSM's...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by .No_Honda. &raquo;</TD></TR><TR><TD CLASS="quote">
Can I get that link to Some FSM's...</TD></TR></TABLE>

I sent you the link.

 

Thanks bro