I had the igntion installed a long timw ago but took it out for a while and decided to put it back in today after a year. so I hook it up all via same way it was set up last time. everything works, it's driveable and nice. rev limit works.. BUT, my tach is dead and reads 0?!?! WTF. so i take a look and keep trying different things and somwtiems it'll read, and sometimes it won't. my connections are all perfect. 75% of the time driving the tach is at 0... even tho rev limit etc that I set via ignition still kicks in whenever I want(tested it at 2000RPM to check) I unhooked it all and hooked the blaster coil itself to my system and left the MSD ignition out and it works perfectly fine(just like it did a few hours ago.. could my ignition be gonig bad? I know my actual RPM's are fine cause I have a vafc as well.


Modified by Tchleung at 11:22 PM 11/12/2004


Modified by Tchleung at 11:25 PM 11/12/2004

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Tchleung &raquo;</TD></TR><TR><TD CLASS="quote"> timw somwtiems limtie tc ignitino kciks wenever Iw ant balster systema dn eflt coudl gonig nkow ahve </TD></TR></TABLE>

Thats some good stuff right there. Confirm the blue wire on the distributor is not cut, etc.

 

OMG my typing sux ***!! haha. it's fine....