Not sure if it belongs in this forum or not but... Do anyone know where i can buy single msd pills at or do i just have to buy a whole set?

 

i belive they are just sold by the set, but you might check ebay. Also, i have a chart on my website that lists the values of all the rpm pills, so you can take a simple resistor and make your own....
http://bhg.ath.cx/rpmpills.html

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tRaCeBuStAbUsTeR &raquo;</TD></TR><TR><TD CLASS="quote">Not sure if it belongs in this forum or not but... Do anyone know where i can buy single msd pills at or do i just have to buy a whole set?</TD></TR></TABLE>

Which one do you need? I have some...

As for buying them. You can't buy them individually. You have to buy a whole series like 6-6800 or 7-7800 etc...

 

I sell them.

 

what u got franky? ill see if i can use it or not. something around 8,600 or 8,700. and im not sure which one i should use for the launch... how high u launch at and what size slicks? i got 24.5x7x13 but i think im gonna buy some 25x8.7x13 later on

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tRaCeBuStAbUsTeR &raquo;</TD></TR><TR><TD CLASS="quote">what u got franky? ill see if i can use it or not. something around 8,600 or 8,700. and im not sure which one i should use for the launch... how high u launch at and what size slicks? i got 24.5x7x13 but i think im gonna buy some 25x8.7x13 later on</TD></TR></TABLE>

I launch between 7400-7600 depending on where I'm at and how well the track is prepped. I'm running the 25" slicks. I use the same launch rpms on the 24" slicks. I run any where from 5-6psi again depending on traction and track prep. I pretty sure I have those pills. Let me know which one(s) you want and I'll check to see if I have them...

 

i need a 8,600 or 8,700. for launch im not too sure which one i need but im assuming something around 7,000 or slightly higher. let me know what pill you have

 

you could always buy the adjustable control module. Pills can cost you more if you keep changing your setup......

 

isnt that like $125-$150 for that?

 

http://www.msdignition.com/rpm_13.htm

They run about $54 plus shipping and tax.

http://store.summitracing.com/...h.asp

Two pill kits will cost more than this.....

 

would something like this be better?
http://store.summitracing.com/...h.asp

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tRaCeBuStAbUsTeR &raquo;</TD></TR><TR><TD CLASS="quote">would something like this be better?
http://store.summitracing.com/...h.asp</TD></TR></TABLE>

That would work too. You can use that for your 2 step/launching. Then you just need one pill for redline.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TurboChrgd_Civic &raquo;</TD></TR><TR><TD CLASS="quote">

That would work too. You can use that for your 2 step/launching. Then you just need one pill for redline.</TD></TR></TABLE>

Right, I have a 2 step utilizing the adjustable rev control for my launch and a pill for my rev limit. It works well and gives me some flexibility with the different track conditions.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by skunked &raquo;</TD></TR><TR><TD CLASS="quote">

Right, I have a 2 step utilizing the adjustable rev control for my launch and a pill for my rev limit. It works well and gives me some flexibility with the different track conditions.</TD></TR></TABLE>

Or just buy an MSD digital 6. Has the 2 step feature that you can run off the clutch with a relay which is how I had it setup previously and worked great. "I have it setup a little different now."

With the digital 6 you can adjust redline and the 2 step to whatever you want.