what are the must have mods on a gsr motor? going all motor

 

depends on how much money you are willing to spend usually start with the basic three intake, header, and exhaust.

 

get a skunk2 intake manifold, password jdm whale *****,megan racing header,hondata or something to tune. stay away from the ricer exhaust.

 

i had that on mine and went 14.45et added skunk2 st2 bumpsticks springs ret. and about 2 hours on the dyno and went 13.85et on a .503rt

 

you absolutely positively need a ported vtech solenoid

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by blackGSRcoupe94 &raquo;</TD></TR><TR><TD CLASS="quote">get a skunk2 intake manifold, password jdm whale *****,megan racing header,hondata or something to tune. stay away from the ricer exhaust. </TD></TR></TABLE>

Boo on the whale *****
Boo on the megan header

A tuned length intake will make more horsepower than that. And there are WAY better headers then that if you have the $$$.

Just search for some B18C builds and you'll see what people are doing to make power.

 

i didnt pay anything for the whale ***** or the header so free parts plus more tuned power boo you i was just telling my parts and numbers not forcing anyone to buy it!!!

 

what do you port out when you do this. not a noob just never heard of this

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by blackGSRcoupe94 &raquo;</TD></TR><TR><TD CLASS="quote">what do you port out when you do this. not a noob just never heard of this
</TD></TR></TABLE>

Complete contradiction considering there is no such possible thing as a ported vtec solenoid.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by blackGSRcoupe94 &raquo;</TD></TR><TR><TD CLASS="quote">i didnt pay anything for the whale ***** or the header so free parts plus more tuned power boo you i was just telling my parts and numbers not forcing anyone to buy it!!!</TD></TR></TABLE>

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by blackGSRcoupe94 &raquo;</TD></TR><TR><TD CLASS="quote">get a skunk2 intake manifold, password jdm whale *****,megan racing header,hondata or something to tune. stay away from the ricer exhaust. </TD></TR></TABLE>

Actually, you did tell him what to get, not at any point did you state that these are YOUR parts. Good job on contradicting yourself twice and then telling the OP to buy inferior parts.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by gibsanez &raquo;</TD></TR><TR><TD CLASS="quote">Complete contradiction considering there is no such possible thing as a ported vtec solenoid.
</TD></TR></TABLE>

havent you heard, it's all the rage in the type r forum

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by doood &raquo;</TD></TR><TR><TD CLASS="quote">

havent you heard, it's all the rage in the type r forum </TD></TR></TABLE>

lolz, I've seen more than one thread asking about it before.