Maxing out 280cc 'lude injectors?
Thread Starter
MiG-21 superfan
Joined: Mar 2001
Posts: 8,628
Likes: 3
From: near the ocean, Moderator City, NJ
Maxing out 280cc 'lude injectors?
-Engine is a high-compression d16y8. I have noticed that at times I have hit up to 98% duty cycle somewhere after 7k on with my Prelude injectors (OBD2 280cc)...
The B16b base map, which was tailored for my setup on the dyno, comes 'stock' set for 280cc injectors, according to the Power FC literature...so I know it is not the configuration of the injector sizing feature...
Fuel pressure is @ 36-38 w/ hose off, aem regulator with middle-sized orifice and Holley 255 FI pump. Interestingly, we did have to juice up the b16b maps quite a bit to get my motor what it needed fuel wise...could it be that I need to set a higher baseline fuel pressure and re-organize my Power FC fueling to keep the duty down?
I just find it odd, since 240cc injectors have been known to support up to 210 whp on DOHC.
Modified by builthatch at 4:14 PM 10/12/2004
The B16b base map, which was tailored for my setup on the dyno, comes 'stock' set for 280cc injectors, according to the Power FC literature...so I know it is not the configuration of the injector sizing feature...
Fuel pressure is @ 36-38 w/ hose off, aem regulator with middle-sized orifice and Holley 255 FI pump. Interestingly, we did have to juice up the b16b maps quite a bit to get my motor what it needed fuel wise...could it be that I need to set a higher baseline fuel pressure and re-organize my Power FC fueling to keep the duty down?
I just find it odd, since 240cc injectors have been known to support up to 210 whp on DOHC.
Modified by builthatch at 4:14 PM 10/12/2004
Thread
Thread Starter
Forum
Replies
Last Post
hybrid_vtec
All Motor / Naturally Aspirated
9
Jun 28, 2005 09:39 PM