Just checking to see if anyone has finished designing one that will work with LHD cars. I was thinking about the Cusco, but do not want the hassle of bending it and getting it to fit properly. I was working on my own design, but just have not had time to put into it lately.

 

Before messing with a brace, make sure you have stainless steel braided lines, the correct and fully operational mastercylinder (especially if you have changed MC or calipers, etc), and good pads for what you are doing.

You should not need that much pedal pressure to bend the firewall if things are working correctly. I have never seen this on my Improved Touring CRX or others that road race...

 

Were can I find a photo of these MC braces (perferrably an installed photo). I've tried tracking down a photo of the discontinued Spoon version without any luck. Can anyone help?

N/M I have found some, thanks anyways.


[Modified by SLPR, 10:56 AM 4/8/2002]


[Modified by SLPR, 11:04 AM 4/8/2002]

 

I have upgraded all my componants, but every little extra bit helps in this area.