ok I have a first gen b16a head and was wondering were do i mount a map sensor on a itr intake manifold. Being that obd1/2 b series motors have the map sensor on the tb. any help would be apprecative

 

What TB are you using and what is your reason for not mounting it in the stock location?

 

shut up rich

 

You need to use the 94+ integra t-body where the map sensor sits on top of the t-body. If you use the older 90-93 style, you'll need to run a hose to the map sensor.

Either way, you need the newer style map sensor.

 

thats what i though
thanks i needed reassurance

 

so what ia have to do if i don't find a obd1/2 tb then i need a obd1/2 map sensor and just mount it anywhere if it is connected to the tb.

 

If you use the 1st gen b16 TB you won't have the fast idle valve because it's on the 1st gen intake manifold. So most people use a OBD 1 TB from a GSR or B16 that has the fast idle valve in on the TB. For the MAP sensor you can use either one, they are all the same just one is on the firewall and one is on the TB. If you use the OBD 1 TB just extend the MAP plug up and use the one on the TB.
You need the OBD 1 TB gasket too.