lsvtec head alignment off?
Thread Starter
I'm a Jackass
Joined: Jun 2004
Posts: 494
Likes: 0
From: some where in, CLMT, USA
lsvtec head alignment off?
my machine shop is trying to tell I should have him weld some holes on the head because they wont line up perfict with my block, is this true? it is a 99 b18b1 and 00b16 head. when I asked him what holes he said "some of the holes that the oil gose from the head to the block" so he wants to weld them up and redrill them to line up perficet.
Joined: Jan 2003
Posts: 1,964
Likes: 0
Re: lsvtec head alignment off? (dumpeDc2)
I have never built an lsv but as I understand it you need to run an oil feed from the block (pressure sender location or sandwich adapter) to the head. You need to tap the head to screw in a fitting.
I have never heard of welding up holes lol.
I have never heard of welding up holes lol.
Thread Starter
I'm a Jackass
Joined: Jun 2004
Posts: 494
Likes: 0
From: some where in, CLMT, USA
Re: lsvtec head alignment off? (devnull)
man I was like WTF is this guy talking abought, but I wasent shure becuse I have never knowen anyone that has built one before. oh and I also got the golden eagle Lsvtec kit to plug the one hole
Joined: Jan 2003
Posts: 1,964
Likes: 0
Re: lsvtec head alignment off? (dumpeDc2)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dumpeDc2 »</TD></TR><TR><TD CLASS="quote">man I was like WTF is this guy talking abought, but I wasent shure becuse I have never knowen anyone that has built one before. oh and I also got the golden eagle Lsvtec kit to plug the one hole </TD></TR></TABLE>
If you got the dowels and the head gasket AFAIK you are ready to go. Check out this site - it goes through the build.
LS/VTEC build up
If you got the dowels and the head gasket AFAIK you are ready to go. Check out this site - it goes through the build.
LS/VTEC build up
Thread Starter
I'm a Jackass
Joined: Jun 2004
Posts: 494
Likes: 0
From: some where in, CLMT, USA
Re: lsvtec head alignment off? (devnull)
ya good **** devnull I think its gonna turn out ok. the only think is on wirring it up. I have a P28 and im not gonna be running a knock sensor but im still unshure on where to pin it in on the ecu
Joined: Jan 2003
Posts: 1,964
Likes: 0
Re: lsvtec head alignment off? (dumpeDc2)
Unsure on where to pin the knock sensor? If your not using it just don't connect it.
BTW here are some links to pinouts:
pinouts
p30_obd1
p72_obd1
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dumpeDc2 »</TD></TR><TR><TD CLASS="quote">ya good **** devnull I think its gonna turn out ok. the only think is on wirring it up. I have a P28 and im not gonna be running a knock sensor but im still unshure on where to pin it in on the ecu</TD></TR></TABLE>
BTW here are some links to pinouts:
pinouts
p30_obd1
p72_obd1
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dumpeDc2 »</TD></TR><TR><TD CLASS="quote">ya good **** devnull I think its gonna turn out ok. the only think is on wirring it up. I have a P28 and im not gonna be running a knock sensor but im still unshure on where to pin it in on the ecu</TD></TR></TABLE>
Thread
Thread Starter
Forum
Replies
Last Post
