I have a LS motor, b18a1, and have the 403 crower cams for that motor...i also have a ZC motor can i swap the 403 cams into the zc?!

 

I am pretty sure it won't work but, May I ask why you would want to do this?

Phil

 

Got the cams in a motor with a blown bottom end...and i have a running zc in my hatch...maybe put the cams in

 

Pretty sure it won't work. the dohc zc is basicaly the same as a usdm d16a from a first gen teg.

 

search on this tpoic more.. i heard valve terain can be swaped... not sure if that means cams too..... but there is info out there somewhere

also.. TIP... to run a d16 SI Distrubtor on a DOHC ZC.. run a LS cam cap.. where the dissy bolts up .. ***

 

usually teh cams match teh bore spacing pretty well on an engine since the valves match the bore spacing too. last i knew the D had a smaller bore
than a B series....meaning the broes are closer together.