i have a 92 civic with a 2nd gen b16 swap, and when i got the swap done it didn't come with these two lower torque mounts, and im just wondering, if i could just use the ones from a d-series motor or would they have to be from a b-series

thanks

 

no you can not usd the civic mounts you need 94 and up gsr or ls and that will work the only one you can used off the civic is upper trans mount have fun with it

 

is the "upper trans mount" the one labeled right front mount?

i only need the ones labeled right front mount and left front mount

 

no that is trassmission mount .you need right front and left front mounts. need to be off 94 up gsr or ls i have doen swaps alot if you have any more ? im me lsvtec1975

 

i need #'s 11,12,13 and all hardware surrounding those






Modified by 92civeg at 6:38 PM 1/7/2004

 

someone has to know

 

ttt

 

that is right 11 12 13 1 16 17 and all the hardware

 

I have the #1 in that diagram..if you need it let me know..its from a 95 gsr.

 

i just put a b16 2nd gen in a 93 eg and i used all the mounts from the d16z6 except for the rear, and passenger side (auto to man conversion) and everything fits fine.

 

I believe the rubber mounts are the same.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by doublejz &raquo;</TD></TR><TR><TD CLASS="quote">i just put a b16 2nd gen in a 93 eg and i used all the mounts from the d16z6 except for the rear, and passenger side (auto to man conversion) and everything fits fine.</TD></TR></TABLE> the brackets are not the same as a z6

 

so do i need them from an integra or can i use the ones from a civic?

 

YES GSR OR LS

 

I also need those mounts if anyone has them.