What you think of this? Type S head on K24 block, decked out to 2.6 liters. Custom full dome high compression pistons about 16:1, rods, knife-edge crank, fully done up head with ITB's, HondaData, and if somebody out there can make some custom titanium timing chains!?!

 

go for it. cuz titanium is cool. what're you gunna use it for?

 

you should be banned for being an idiot!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by PandaEG &raquo;</TD></TR><TR><TD CLASS="quote">custom titanium timing chains!?! </TD></TR></TABLE>
BAHAHAHAHAHAHA...

16:1 compression... right.....

come on dude, be realistic.

 

Man your a jackass. Honda should be a shamed they sold you a car.

 

Yeah, pretty crazy idea. Sorry, forgot to state that it is for a full race setup. Titanium timing chain is just a suggested item. Come to think that the K series uses timing chains, and with a deck plate, a custom timing chain is a must. Call me crazy, but one day, someone will pick this up and run some fast *** times!

 

 

funky pix, but yeah, titanium valve springs!

 

16:1 CR? Is this for an Indy race car?

 

i think he should go with mushimotor zx2 tires, and a motec system exhaust instead.

 

Its not for an Indy Race car..lolz...but with max dome compression pistons and a 3/4 inch deckplate, it could be possible...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by PandaEG &raquo;</TD></TR><TR><TD CLASS="quote">Titanium timing chain is just a suggested item.</TD></TR></TABLE>

Which properties of titanium would support the suggestion that it would be a fit material for construction of a timing chain?

 

Who knows...would it be possible? If you know what materials best fits to make a timing chain, yet light and strong, please give me your suggestions...

 

im sure that would be a killer NA motor, untill people have 20gs to drop, we'll probably stick with bseries, though they are starting to come out with some nice stuff for the Ks.

 

I think 20gs is a lowball on something to that extent, assuming it could be done

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Casey &raquo;</TD></TR><TR><TD CLASS="quote">I think 20gs is a lowball on something to that extent, assuming it could be done</TD></TR></TABLE>
ha well i wasnt pricing it out per say. but giving a large sum of cash that not many people have to drop on a motor.