Jun stage 3 cam setting.

Reply Subscribe

Thread Tools

Search this Thread

Jan 29, 2003 | 10:35 AM

COLORPROS

Thread Starter

Joined: Jan 2003

Posts: 1,419

Likes: 0

From: Unknown Road, nC, us

Jun stage 3 cam setting.

Anybody have the best positions for cam gears when using jun stage 3 cams on a b18c5?

Jan 29, 2003 | 11:47 AM

Al Bundy

Honda-Tech Member

Joined: Apr 2001

Posts: 1,539

Likes: 0

From: Surf City, CA, USA

Re: Jun stage 3 cam setting. (COLORPROS)

There is no best positions. Go get your car tuned

Jan 29, 2003 | 03:03 PM

jdlvl_type_R

Joined: Jan 2003

Posts: 104

Likes: 0

Re: Jun stage 3 cam setting. (Al Bundy)

yep, get your car tuned, then see how much you get out of that

Jan 30, 2003 | 11:38 AM

advanracing62

Honda-Tech Member

Joined: May 2001

Posts: 2,244

Likes: 0

From: Boise, ID

Re: Jun stage 3 cam setting. (jdlvl_type_l2)

FYI- JUN reccommends 0,0 at initial start. Each tick is 2 degrees. Have fun!

Feb 4, 2003 | 02:21 PM

google

Junior Member

Joined: Oct 2002

Posts: 786

Likes: 0

From: aspirated, na, usz

Re: Jun stage 3 cam setting. (advanracing62)

tune it yo

Feb 4, 2003 | 02:50 PM

H25

Honda-Tech Member

Joined: Nov 2002

Posts: 3,133

Likes: 0

Re: Jun stage 3 cam setting. (COLORPROS)

hey colorpros i run jun stage 3 cams all the time in my motors i build. the best setting is +1 on the intake and -1.5 on the exhaust to be safe.. leave it there and run about 43 psi fuel pressure at idle. 14-15 degrees timing btdc. and get yourself a good ecu that revs out. skunk, mugen, etc. have fun!!