JUN camshafts- help!
Thread Starter
Joined: Jun 2002
Posts: 35
Likes: 0
From: Lisbon, Lisbon, Portugal
JUN camshafts- help!
I have in my ITR the JUN ECU and Camshafts type 3. Can anybody tell me, what is the best way to sharpen the camshafts? What I did was:
1º step- I put the intake cam 1º back and forward and I measured the power.
2º step- the same but for the exhaust cam.
3º step- the same again for the intake cam.
The final result was:
the intake is at 0º (center);
the exhaust is at 1º forward.
But I think that is not normal that the best power result is with the intake cam at 0º!?
I have now 235hp.
What do you think?
Thank you.
1º step- I put the intake cam 1º back and forward and I measured the power.
2º step- the same but for the exhaust cam.
3º step- the same again for the intake cam.
The final result was:
the intake is at 0º (center);
the exhaust is at 1º forward.
But I think that is not normal that the best power result is with the intake cam at 0º!?
I have now 235hp.
What do you think?
Thank you.
Thread
Thread Starter
Forum
Replies
Last Post
Gabe_
All Motor / Naturally Aspirated
1
Jan 25, 2004 03:19 AM
Ronin Panda
All Motor / Naturally Aspirated
4
Jan 8, 2004 06:23 AM
Death_to_Thieves
Acura Integra Type-R
4
Dec 5, 2002 11:00 AM