Ok, I've replaced my Lower, inner A-arm bushing like three or four damn times!!! Why would it keep going out??? oh yeah it's on a 94 civic EX with a B16 swap...if that makes a big deal!!

 

What keeps happening to it? What are you replacing it with? Stock parts?

 

It just keeps going out....I just took it out last night and the thing was fucked....i replaced it with a new one i ordered from NAPA....who else makes good bushings?

 

have you tried Urethane bushings in there?

if installed correctly i'm not sure why the OEM or similar bushings would be wearing out or giving out. maybe the material of the aftermarket bushings are not as good as the Honda OEM. if you want it to last for a very long time, then try the Energy Suspension bushings or Prothane, etc.

 

yeah i thought about going with them.....

 

do you have traction bars or get LOTS of wheels hop. Is you suspension bent at all? If you have access to a press i would look at poly bushings!
good luck

 

NO the suspension is all stock expect for the Maxspeed springs

 

Are you remembering to torque it only once it's on the ground or are you tightening and tourquing while the vehicle is in the air?
That'll rip it for sure.

 

how do i get to it will its on the ground? my car is sitting on its *****