D16z6
OBD1 harness
p28

So I am building a d16z6 powered dune buggy and I used a chopped up harness to work with. I did an initial wiring prior to placing everything through the new firewall, and it ran perfectly after about 30hours of working on it. I reran the wires through the firewall and loomed everything up, and now it doesn't work. The problem, I believe, is some sort of grounding issue. I eliminated some of the wires that I didn't THINK I was using, but apparently I eliminated one too many. I checked and am getting voltage on the YELLOW/BLACK wire to the injector when grounding to the frame (12V) and across the connector at the injector I get 7-9 volts as I should. I removed the fuel rail and pulled the injectors and there is plenty of gas through the rail but the injectors won't squirt.

Hopefully I haven't left out any other info. I can take pictures if it will help.

 

Problem solved. Nevermind.