Injector Wiring Help Please :D
Thread Starter
Honda-Tech Member
Joined: Jun 2009
Posts: 52
Likes: 0
Injector Wiring Help Please :D
First off I have a 00 Acura Integra GSR. I recently removed my motor and installed an obd1 motor inside of it. I got new injectors that required a resistor box, so I am trying to wire up my injector clips for my new injectors. I already wired in the resistor box to my old clip wires and now it is time for me to cut my old clip wires and solder them to my new clip wires(which I ripped off an old civic from a Junkyard. I took some pictures to show you what I am going through. The colors are confusing me and I do not know which end to connect to. Ok Please help I know that you guys can help me with this one.
Honda-Tech Member
Joined: Jan 2007
Posts: 193
Likes: 0
From: elk grove, ca, us
Re: Injector Wiring Help Please :D
yellow and black is common power for all injectors and the other wires go to the ecu ...jus match the pairs and your good
Last edited by energ3tic2; Jul 28, 2009 at 05:58 PM.
Thread
Thread Starter
Forum
Replies
Last Post
