hey everyone,
I'm having a no spark issue with a obd1 ls motor swapped into an obd0 integra. I have the correct ecu, jumpers, distributor etc.. Grounds are all clean and tight.

i followed this
http://www.team-integra.net/forum/bl...eshooting.html

and i have not pulse from the negative side of the coil with a test light. I have replaced the ignitor and still have the same problem.

My question is, what is the next step? everything else in the diz. seems to check out. I have swapped everything in the distributor with a spare and still have no spark.
thanks