Tech / Misc Tech topics that don't seem to go elsewhere.
Sponsored by:
Sponsored by:

Idle Problem

Thread Tools
 
Search this Thread
 
Old Sep 20, 2005 | 01:51 AM
  #1  
DC2*Integra's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Mar 2004
Posts: 2,008
Likes: 0
From: So, Cal, usa
Default Idle Problem

So my idle starts off okay after warming up, and after driving it some, the idle would get very low. So i cleaned the IAVC, and now the idle got even worst. Idle is soo low that car keeps wanting to stall. Do i need to get a new IAVC?
Reply
Old Sep 20, 2005 | 06:09 AM
  #2  
Pearl Crx's Avatar
Junior Member
 
Joined: Jun 2004
Posts: 625
Likes: 0
From: Charlotte, NC, USA
Default Re: Idle Problem (DC2*Integra)

Did you try turning the idle screw up to increase the idle?
Reply
Old Sep 20, 2005 | 11:15 AM
  #3  
DC2*Integra's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Mar 2004
Posts: 2,008
Likes: 0
From: So, Cal, usa
Default Re: Idle Problem (Pearl Crx)

yeah, the idle screw doesnt do much. Right after the car warms up, the idle is fine. Then after driving the car a bit, the idle just gets retarded
Reply
Old Sep 20, 2005 | 11:22 AM
  #4  
mmuller's Avatar
Mad Scientist
 
Joined: Nov 2002
Posts: 5,827
Likes: 1
From: tallafizzy, FL state
Default Re: Idle Problem (DC2*Integra)

clean out the tb; take out the idle screw, clean in there also; clean iacv; reset idle.
remember that to set the idle with the iacv unplugged, set it to 600 rpms.
Reply
Old Sep 20, 2005 | 11:25 AM
  #5  
DC2*Integra's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Mar 2004
Posts: 2,008
Likes: 0
From: So, Cal, usa
Default Re: Idle Problem (mmuller)

thanks, ill try in in the next hour
Reply
Old Sep 20, 2005 | 12:51 PM
  #6  
DC2*Integra's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Mar 2004
Posts: 2,008
Likes: 0
From: So, Cal, usa
Default Re: Idle Problem (DC2*Integra)

thanks mmuller, your method worked.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Run Away
Honda Prelude
6
Mar 11, 2006 05:08 PM




All times are GMT -8. The time now is 08:17 AM.