which tools do i need to properly install ground control coilovers on my integra?

 

you might want to rent a spring compressor and your basic hand tool, 0oh and some allen wrenches

 

deep socket set
torque wrench
breaker bar (not a necessity i guess but it helped me)
allen wrench
pretty much just basic stuff. are u doing shocks as well? you may need a spring compressor...

 

You will need a spring compressor. Or you can take them somewhere, have them compressed and get the OE dampers off. You probably won't need the spring compressed to install the GCs though.

 

no you dont need the compressor to get the ground control on the damper, you only need the compressor to get the stock spring off the damper, just because the stock spring is alot longer then the groundcontrol spring and its under alot of pressure.

 

i am not doing shocks

 

ill be doing it on wedsnday so i hope i dont **** up anything. thanks for the advice and tips i will post up anything else if i have any porblems.