i know there is an H2B adapter, but does a B2D exist?
i have a b20 and need a transmission
i still have the 5spd off the old d16y8 layin around
wondering if there are any plates made to make this happen
i still have the 5spd off the old d16y8 layin around
wondering if there are any plates made to make this happen
I don't believe so.
Why don't you look on http://www.turbod16.com and http://www.d-series.org and try and sell the d tranny there. Then pick up a used B tranny.
Why don't you look on http://www.turbod16.com and http://www.d-series.org and try and sell the d tranny there. Then pick up a used B tranny.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by doodooheadfart »</TD></TR><TR><TD CLASS="quote">i have a b20 and need a transmission
i still have the 5spd off the old d16y8 layin around
wondering if there are any plates made to make this happen
</TD></TR></TABLE>
waste of time to do a B2D.. just sell it and buy a b trans... and the cost of the adapter plate you can buy 2 b series trans!!
i still have the 5spd off the old d16y8 layin around
wondering if there are any plates made to make this happen
</TD></TR></TABLE>waste of time to do a B2D.. just sell it and buy a b trans... and the cost of the adapter plate you can buy 2 b series trans!!
Trending Topics
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by h22crxpwr »</TD></TR><TR><TD CLASS="quote">
waste of time to do a B2D.. just sell it and buy a b trans... and the cost of the adapter plate you can buy 2 b series trans!!
</TD></TR></TABLE>
and for the cost of 1 b trans, you can buy 2 d trans..
waste of time to do a B2D.. just sell it and buy a b trans... and the cost of the adapter plate you can buy 2 b series trans!!
</TD></TR></TABLE>
and for the cost of 1 b trans, you can buy 2 d trans..
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sanimalp »</TD></TR><TR><TD CLASS="quote">
and for the cost of 1 b trans, you can buy 2 d trans..
</TD></TR></TABLE>
and use it as a doorstop unless you have an adapter plate that costs 1200 bucks...
and for the cost of 1 b trans, you can buy 2 d trans..
</TD></TR></TABLE>and use it as a doorstop unless you have an adapter plate that costs 1200 bucks...
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by h22crxpwr »</TD></TR><TR><TD CLASS="quote">
and use it as a doorstop unless you have an adapter plate that costs 1200 bucks...
</TD></TR></TABLE>
for sure
had no idea the kits were so expensive!
been tryin to sell this little guy for months now
thanks 4the input everyone
and use it as a doorstop unless you have an adapter plate that costs 1200 bucks...
</TD></TR></TABLE>
for sure
had no idea the kits were so expensive!
been tryin to sell this little guy for months now
thanks 4the input everyone
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by extra cam needed »</TD></TR><TR><TD CLASS="quote">Yeah the B2D adapter plates will help for the 4wd wagons.</TD></TR></TABLE>
word i got a 4wd wagon and i was thinking of building a turbo mini me for it but if i can go b2d that would be badass
word i got a 4wd wagon and i was thinking of building a turbo mini me for it but if i can go b2d that would be badass
Honda-Tech Member
iTrader: (6)
Joined: Apr 2005
Posts: 11,779
Likes: 0
From: G SPEED CORPORATION FOREVER
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by rallyrat427 »</TD></TR><TR><TD CLASS="quote">
word i got a 4wd wagon and i was thinking of building a turbo mini me for it but if i can go b2d that would be badass</TD></TR></TABLE>
same here, i just imported a AWD 4 door EG. Motor is a Dohc zc.
word i got a 4wd wagon and i was thinking of building a turbo mini me for it but if i can go b2d that would be badass</TD></TR></TABLE>
same here, i just imported a AWD 4 door EG. Motor is a Dohc zc.
Thread
Thread Starter
Forum
Replies
Last Post





