do i have to find some obd2 clips and put it on my obd1 harness?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SupaFly_Honda &raquo;</TD></TR><TR><TD CLASS="quote">do i have to find some obd2 clips and put it on my obd1 harness?</TD></TR></TABLE>

why the hell would u do that? if u need obd1 injectors i have like 10 sets just pm me

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by civicflnum1 &raquo;</TD></TR><TR><TD CLASS="quote">

why the hell would u do that? if u need obd1 injectors i have like 10 sets just pm me</TD></TR></TABLE>

nah...i have a good deal on a set of rc injectors but they are obd2, and my car is obd1. bumb

 

i think they should work, because on obd2 cars you would need clips for them

 

i didnt know rc made injectors for obd2 cars....but yeah just wire the clips on it will work fine. make sure u get the ground with the ground though

 

thanks

 

As long as the impedance ratings are the same - it doesn't matter. You will have to clip and re-splice - but it's honestly not a huge deal as an injector is just a solenoid. It's either on or off (variable duty cycle is accomplished with PWM).