how hard is obd0 to obd1

Reply Subscribe

Thread Tools

Search this Thread

Jul 31, 2003 | 09:37 PM

justmotor13

Thread Starter

Joined: Oct 2002

Posts: 201

Likes: 0

From: Illinois, United States

how hard is obd0 to obd1

whats up guys i have a 90 crx and i plan on swapping a b18c5 in it, but i need to rewire the whole car from non obd to obd1, how hard is it and what basic things do u have to change over. thanks guys.

Jul 31, 2003 | 09:49 PM

Agent#ONE

Joined: Dec 2002

Posts: 1,009

Likes: 0

From: ALL MOTOR B18C5, USA

Re: how hard is obd0 to obd1 (crx31286)

get a harness from that guy on here htat sells em, then use the distributor from the ITR motor, and get a plugg conector for the stock si harness, converting the distributor to grey plugg.
its easy, go by positions of the wiring, 4 on top, 3 or 2 on the bottom, i did the same swap, and had no problems.

Aug 1, 2003 | 04:28 AM

Blown90hatcH

Honda-Tech Member

Joined: Dec 2000

Posts: 20,006

Likes: 3

From: Tampa, FL

Re: how hard is obd0 to obd1 (Agent#1)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Agent#1 »</TD></TR><TR><TD CLASS="quote">get a harness from that guy on here htat sells em, then use the distributor from the ITR motor, and get a plugg conector for the stock si harness, converting the distributor to grey plugg.
its easy, go by positions of the wiring, 4 on top, 3 or 2 on the bottom, i did the same swap, and had no problems.</TD></TR></TABLE>

Get an OBD0 to OBD1 conversion harness(Here is the harness you will need), run the ITR distributor and O2 sensor. Let me know if I can provide a harness or any help.

Jason