In order to use a hondata ecu, i have to convert to obd1. But i am using a b16a1 head? So do i have to just use the a2 distributor, and wire in the plug to make it work? and use the obd0 to 0bd1 harness for the ecu? thanks. I need to know this before i get too involved with my project

 

I assume that your car is non-OBD. You have 2 options. One...buy a non-OBD PR3 ecu and chip it for Hondata. Two...convert to OBD1 ie, dist, ecu, injectors...etc. I went with the non-OBD PR3ecu. There is one in classifeds right now. GL

-Ryan

 

yah i think what im gonna do is get an obd1 head. like a gsr or b16a2 and completely convert to obd1. i am using a b20 block anyways. so i think it will work out in the end

 

Swap the dizzy(re pin the distributor , convert to 4 wire 02 sensor, I think you can keep the injectors if you leave the resistor box inline.

There are some links in this thread that offer help:
https://honda-tech.com/zerothread?id=685646

-PHiZ

 

thanks guys