i'm trying to stop my oil pan from leaking. i have a moroso oil pan. i've replaced everything twice now and done it right. gasket, small amounts of hondabond (one time) and high temp gasket maker the other, torqued to spec, let gasket set. i still have some leaking around the gasket. any suggestions?

 

Have you checked your rear main seal? I'm having the same problem and bought a genuine honda oil pan, retorqued everything in sequence according to helms and still get leaks. My guess is, it's coming from the rear main seal. I'll have to check mine once drop the transmission and replace the clutch/flywheel.

 

hmm...don't think so....i see some oil on the front side of the block too.

 

try taking out the metal stoppers on the oil pan gasket.
try hylomar also

 

What oil you using is the oil pressure to much and causing the seal to blow out??? I had that problem on mine...

 

Try Honda Ultraflange. that is what the k series use to seal the gasketless oil pan.

 

what oil pan gasket you using? OEM or aftermarket? You might be deforming the gasket when you torque it down.

 

i have stock honda oil pan gasket...i'm wondering if the holes in the gasket are messing things up cuz the moroso oil pan doesn't have the little bumps to fill the holes. do you guys know of any aftermarket gaskets that don't have the holes.