Help testing coil in Dizzy
Thread Starter
Honda-Tech Member
Joined: Jul 2010
Posts: 29
Likes: 0
From: Guam
Help testing coil in Dizzy
I'm testing terminals for resistance to make sure the coil is good in my dizzy. However, I don't exactly know how to test with an external MSD coil.
Tested positive and negative from coil (0 ohms):
Tested A and B, then A and C (both .8 ohms):
The manual talks about primary (0.8 ohms) and secondary (1.2 ohms). Everything I tapped was either 0 or 0.8. Did I do this right?
Tested positive and negative from coil (0 ohms):
Tested A and B, then A and C (both .8 ohms):
The manual talks about primary (0.8 ohms) and secondary (1.2 ohms). Everything I tapped was either 0 or 0.8. Did I do this right?
Thread
Thread Starter
Forum
Replies
Last Post
undagroundrican
All Motor / Naturally Aspirated
5
Feb 20, 2006 06:25 PM
