Help!! PLX Wideband install..
Thread Starter
Honda-Tech Member
Joined: Oct 2005
Posts: 83
Likes: 0
Help!! PLX Wideband install..
So I've got the PLX Wideband and the DM5 Gauge combo. I have:
- Tapped into the 12v ECU supply
- Grounded close to the ECU
- Confirmed around 11v when car is off and 12.4v when car is on, going to the module.
I have connected the Gauge and it didn't turn on. So i checked the output voltage from the module and it seems to be only .9v - 1v which is likely why the gauge isn't firing up.
Any ideas why is happening???
- Tapped into the 12v ECU supply
- Grounded close to the ECU
- Confirmed around 11v when car is off and 12.4v when car is on, going to the module.
I have connected the Gauge and it didn't turn on. So i checked the output voltage from the module and it seems to be only .9v - 1v which is likely why the gauge isn't firing up.
Any ideas why is happening???
Thread
Thread Starter
Forum
Replies
Last Post
thecca
Honda Civic (2001 - 2005)
4
Jun 19, 2013 05:34 PM
