Here's the deal, i just rebuilt my motor, JE pistons,eagle rods, crower valvetrain, etc., and my car won't start. It cranks and cranks but won't start. I'm not getting any spark and i've already replaced coil and igniter, checked wiring and grounds. Any help would be appreciated, thanks. (94 B18b in 93 civic). By the way there is no CEL

 

check and make sure that blk/ylw by the dist. is getting 12v+..
If not check your fuses under the dash i believe it's da one labeled alternator..
Check your grounds on the engine.. Da one by the thermostat housing causes all kinds of problems...