help!! jdm itr
Thread Starter
Junior Member
Joined: Sep 2003
Posts: 474
Likes: 0
From: Las Vegas, Nevada, USA
help!! jdm itr
ok its a 96 jdm itr with a p73 that means its obd1 correct? and my car is a 99 civic which is obd2. so i need a obd1-obd2 wiring conversion harness right? also will any usdm 94-01 integra axle work for the car, i have the halfshaft just no axles. Also if anyone has any of the two parts i need lemme know a price cause im in the market for them. thanks
Honda-Tech Member
Joined: May 2000
Posts: 6,094
Likes: 6
From: PASADENA, CA, USA
Re: help!! jdm itr (Project99EK)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Project99EK »</TD></TR><TR><TD CLASS="quote">ok its a 96 jdm itr with a p73 that means its obd1 correct? and my car is a 99 civic which is obd2. so i need a obd1-obd2 wiring conversion harness right? also will any usdm 94-01 integra axle work for the car, i have the halfshaft just no axles. Also if anyone has any of the two parts i need lemme know a price cause im in the market for them. thanks
</TD></TR></TABLE>
i'll try my best on what info you spat out here...
-----
No, your 96 JDM ITR engine is OBD2a spec, not OBD1.
All JDM 96-01 Integra Type-R's = OBD2a spec.
Honda of Japan never converterted to OBD2b spec for the Integra Type-R vehicles. They only did for the Civic-R.
------
OBD1 = 92-95 Honda/Acura engines/vehicles/electronics. You don't have any of this as far as your information goes. So forget about anything OBD1 for now.
------
Since your car is US made and is '99 -- its OBD2b spec.
99-00 US civics & 99-01 US integra's = OBD2b
So, in order for you to run your JDM P73 OBD2a ecu, you need a OBD2b->OBD2a ecu jumper harness. I sell this harness if you're interested. Hit me up.
-----
94+ integra axles WILL work with your setup. Sorry, I don't have any of these for sale.
------
Hope the OBD2 info makes sense to you.
</TD></TR></TABLE>
i'll try my best on what info you spat out here...
-----
No, your 96 JDM ITR engine is OBD2a spec, not OBD1.
All JDM 96-01 Integra Type-R's = OBD2a spec.
Honda of Japan never converterted to OBD2b spec for the Integra Type-R vehicles. They only did for the Civic-R.
------
OBD1 = 92-95 Honda/Acura engines/vehicles/electronics. You don't have any of this as far as your information goes. So forget about anything OBD1 for now.
------
Since your car is US made and is '99 -- its OBD2b spec.
99-00 US civics & 99-01 US integra's = OBD2b
So, in order for you to run your JDM P73 OBD2a ecu, you need a OBD2b->OBD2a ecu jumper harness. I sell this harness if you're interested. Hit me up.
-----
94+ integra axles WILL work with your setup. Sorry, I don't have any of these for sale.
------
Hope the OBD2 info makes sense to you.
Thread
Thread Starter
Forum
Replies
Last Post