Planning to put on some side markers on my 99 integra but need a DIAGRAM someone please help ?

 

Need help ?? BUMP::

 

Me too if it exists. Bump!

 

Splice it into the existing corner lens wiring. There's only 2 wires, power and ground, and it doesn't even matter if they're backwards. A diagram would be a little silly.

 

courtesy of PatrickGSR94:

 

you turn signal will be 3 wire, they side marker is 2. take a test light to find out which wire in the turn signal is 12V when the lights are turned on. That wire should also show no power when the lights are turned off. Next establish the ground wire in the turn signal. that will be the ground for your side marker. The third and final wire should show blinking light when hookep up to the test light and the turn signal is activated. This is the other wire you need to hook up. if the side marker is not syncronized with your turn signal, but is blinking, reverse the 2 wires

Hope that helps