first i did a search and not enough info.....
I installed a clutch net stage 2 from importparts.com and when i start in first i could hear the clutch spinning not engaging..also it makes a weird squeking noise..and the clutch pedal is softer than stock..what could this be?!?!? plz help
thank you..ITR-1303

 

Did you put the new throwout bearing in it and did you put the anti seize lubricant on the spindal. OH yeah and did you resurface the flywheel. And see if you need to bleed the clutch line it hydrolic. If all that was done. I would pull it back out and take a look.

 

Sounds like how mine was at first... Clutch Issues Thread

We adjusted it some and the pedal was VERY light... and at the VERY top started to grab...

If you rev the car once it's broken in, it doesn't feel like the pedal will come back up off the floor does it?

Sounds JUST like my situation.

My PP ended up being the culprit.. it ended up breaking after 700 miles.


[Modified by SiR Kid, 12:46 PM 2/20/2002]

 

i think we have the same problem...are u using clutch net???

 

Read the thread... Mine car's apart now

 

e mail me with ur phone # so we can talk!!! i'll give u mine!....neva mind..u got mail!!!


[Modified by R-1303, 7:07 PM 2/20/2002]

 

You've got mail.

 

ahahh i know now u do!!! call me up


[Modified by R-1303, 7:08 PM 2/20/2002]