Having problems with the installation of the 4.7 FD on my 96 JDM ITR tranny (with stock 4.4FD).
The 4.7 FD kit, which I got, came with the final drive ring gear and countershaft only.
My needle bearing would not fit the newly installed 4.7FD.
Can anyone help me with the installation?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by KingHornet &raquo;</TD></TR><TR><TD CLASS="quote">Having problems with the installation of the 4.7 FD on my 96 JDM ITR tranny (with stock 4.4FD).
The 4.7 FD kit, which I got, came with the final drive ring gear and countershaft only.
My needle bearing would not fit the newly installed 4.7FD.
Can anyone help me with the installation? </TD></TR></TABLE>

I'm pretty sure as I recall, the countershaft is a different size between the two. You will need the larger bearing, but I am not sure of how you could go about getting it being that I believe it only came in the JDM ITR's.....

 

Well, mine is a JDM ITR tranny 96 spec, which comes with a 4.4FD.
The bearing I have on my tranny does not seem to fit the 4.7FD.
That is my problem.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by KingHornet &raquo;</TD></TR><TR><TD CLASS="quote">Well, mine is a JDM ITR tranny 96 spec, which comes with a 4.4FD.
The bearing I have on my tranny does not seem to fit the 4.7FD.
That is my problem. </TD></TR></TABLE>

Did you read what I wrote? I did this "conversion" about two years ago. I recall my kit CAME WITH a new bearing. The old bearing WILL NOT fit. You will need to get the larger bearing, I'm just not sure of what/where to order it.

 

u will need all these stuff to install 4.785 FD into USDM tranny.

http://yhst-1408381693991.stor....html