the mount bolt holes are messed up and i wanna put a new case on my tranny , is this hard?

 

Since you have never done a tranny rebuild or swap it would be difficult. You will need assistance with some procedures so having a person who has done this before help you will be invaluable. If you don't need to swap cases DONT. What threads are damaged where you would want to swap anyways?

 

having someone who knows what they're doing to help you would be really good...

BUT if you don't have that option, you could always just use a helm's

 

ok well i found some1 who knows how to change them now its down to what b series case will work with my hydro b16 tranny, its to hard to find a bare b16 case what else will work , thanks

 

I have a bare LS trans case and gears but it's cable. Read you need a hydro case, Damn.