i have problem with my haltech where i have been using it for quite sumym wih success.. but recently change my ignition set up from obd0 thru haltech ignition module to obd1 also thru the same haltech ignition module but this time with external msd blaster 3 coil... my problem at the moment is that the engine isnt idlin very good..seems like running only 3 cyl.. when i revved it,it misses all thru the rev range,well i rev it up to 3k actually.. i have cex all the wiring connections,cex for continuity test..it was al ok.. may be sumthing wrong with the wiring to/from the dissy to the ign module or ecu may be. i hoping sumone here can help..may be with pics of how the wiring to the dissy with or wihout haltech ign module.. i know lots of peeps had success without using the ign module. whats funny was that whe i start knocking on the ign module repeatedly,suddenly the engine idled fine but stil misses..from 3k rpm..hope someone can help me.i im jared already about this.. thanks

 

ttt

 

ttt