h23 vtec
Thread Starter
Junior Member
Joined: Oct 2005
Posts: 758
Likes: 0
From: cullman, al
h23 vtec
does anyone know if you can run type s pistons on an h23 rod or is the wrist pin diameter differen? Also i know the h23 has a bigger stroke than h22 but is it on the up stroke or down stroke?
Junior Member
Joined: May 2005
Posts: 980
Likes: 0
From: WA, USA
Re: h23 vtec (roma's h22eg6)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by roma’s h22eg6 »</TD></TR><TR><TD CLASS="quote">i know the h23 has a bigger stroke than h22 but is it on the up stroke or down stroke?</TD></TR></TABLE>
what do you mean up stroke or down stroke? stroke is the diatmeter of the crank, the crank does not change shape between the up or down stroke. if you plan on putting these pistons in a h23, just take itto a shop and let them do it.
check out the FAQs section of the prelude forum, theres a whole article on h23 vtec stuff..
what do you mean up stroke or down stroke? stroke is the diatmeter of the crank, the crank does not change shape between the up or down stroke. if you plan on putting these pistons in a h23, just take itto a shop and let them do it.
check out the FAQs section of the prelude forum, theres a whole article on h23 vtec stuff..
Thread
Thread Starter
Forum
Replies
Last Post
