H22 Injectors into a LS/Vtec
05-26-2006, 12:05 PM
#1
Thread Starter
Join Date: May 2006
Location: North Jersey, NJ, USA
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
H22 Injectors into a LS/Vtec
Does anyone know the cc's of H22 injectors obd1/obd2. and will they fit into a b-series aem rail. any wiring i might need to know about in advance too please.
05-26-2006, 12:31 PM
#2
Honda-Tech Member
Join Date: May 2004
Location: San Diego, CA
Posts: 1,387
Likes: 0
Received 0 Likes
on
0 Posts
ALL Honda injectors are 240cc's. You will have to worry about clips if you buy OBD-I vs II if you have one or the other. They will fit any other honda rail and IM. No wiring issues I am aware of.
05-26-2006, 09:43 PM
#4
Re: (devnull)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by devnull »</TD></TR><TR><TD CLASS="quote">ALL Honda injectors are 240cc's. You will have to worry about clips if you buy OBD-I vs II if you have one or the other. They will fit any other honda rail and IM. No wiring issues I am aware of.</TD></TR></TABLE>
All <u>B series</u> are 240cc!!
H22 OBD1 = 345cc Peak&Hold
H22 OBD2 = 290cc Saturated
I have the 345s in my LSVTEC.
You will need a tune if you put the 345s in though, It's a BITCH tuning those injectors with my VAFC and an ECU that is chipped for 240s.
All <u>B series</u> are 240cc!!
H22 OBD1 = 345cc Peak&Hold
H22 OBD2 = 290cc Saturated
I have the 345s in my LSVTEC.
You will need a tune if you put the 345s in though, It's a BITCH tuning those injectors with my VAFC and an ECU that is chipped for 240s.
Thread
Thread Starter
Forum
Replies
Last Post
