gsr block with ls crank... which rods?
Thread Starter
Joined: Aug 2003
Posts: 161
Likes: 0
gsr block with ls crank... which rods?
when i rebuild my gsr block, i am planning on used an ls crank, but i am a little unclear on a couple of things. first, which rods? i am almost 99% sure the answer is ls rods, but i just wanna confirm. are there any other issues that i should be aware of? lemme know, thanks.
Joined: Jan 2004
Posts: 362
Likes: 0
From: san antonio, texas
Re: gsr block with ls crank... which rods? (cornhusker)
you will use the ls rods and you will have too block off the oil squirters bacause the counter weights will hit the, but other than than that you will be fine
i would also use acl bearings
i would also use acl bearings
Thread Starter
Joined: Aug 2003
Posts: 161
Likes: 0
Re: gsr block with ls crank... which rods? (93lsd)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 93lsd »</TD></TR><TR><TD CLASS="quote">you will use the ls rods and you will have too block off the oil squirters bacause the counter weights will hit the, but other than than that you will be fine
i would also use acl bearings </TD></TR></TABLE>
what if i go with aftermarket rods like eagle or crower, will i still lose the oil squirters?
i would also use acl bearings
</TD></TR></TABLE>what if i go with aftermarket rods like eagle or crower, will i still lose the oil squirters?
Thread
Thread Starter
Forum
Replies
Last Post
dem0nk1d
Tech / Misc
7
Feb 4, 2007 01:32 PM