Does anyone know of a shop that has a good reputation with nitrous. If any of you could personally give me helpfull information I would appreciate it. I want to know what is the highest compression I could run 150 shot nitrous on, and do I need to sleeve the block or put a blockguard.
Current setup: B18b, JE 9:1, Eagle Rods, Crower valvetrain, 150 shot...and misc.

 

Call nos tech line - most of this so called shops with there untrained tech will just talk out of their ***. So.... if you want an experienace and actually know what they are talking about - call nos tech line, nox tech line, or any nos manufacture.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HONDADNA &raquo;</TD></TR><TR><TD CLASS="quote">Call nos tech line - most of this so called shops with there untrained tech will just talk out of their ***. So.... if you want an experienace and actually know what they are talking about - call nos tech line, nox tech line, or any nos manufacture.</TD></TR></TABLE>

i totally agree, they will know the best for your setup.

 

this is very true. the folks down at nos tech are great. he will also probably tell you that the highest you can go is the highest you can get bc with the properly built block and the best tunner alot can be done. good luck.

here is the email for them. NOS@holley.com

 

Call Kurt at KG Percision Engineering in Hintington Beach, CA
He worked for NOS for 4 years

 

got the number?

 

714 841-8990