fuel pump swapping
factory fuel pump to an ITR or GSR should be just the same.
It's very simple to do. you just remove the chrome plate, unplug the 2 harnesses, then there is about eight or so 10 mm bolts. Disconnect the hoses, remove the pump and reverse the process
You also might want to have a rag just incase fuel pressure is still up there. I would wait a while after driving the car before you change anything though.
It's very simple to do. you just remove the chrome plate, unplug the 2 harnesses, then there is about eight or so 10 mm bolts. Disconnect the hoses, remove the pump and reverse the process

You also might want to have a rag just incase fuel pressure is still up there. I would wait a while after driving the car before you change anything though.
Thread
Thread Starter
Forum
Replies
Last Post



